401, "This page, accessed by selecting Hard Disk Information from the main menu and choosing 'View Hard Drive Jumper Settings', provides a visual display showing the different hard drive jumper configurations for most drives.\n\nFollow the directions in the Quick Help box to find the jumper settings for a drive.\n\nALTERNATE CAPACITY:\nAlternate Capacity setting will change the size your drive reports to the computers BIOS such that for:\n- Drives under 33GB - the drive will report 2.1GB\n- Drives over 33GB - the drive will report 33GB.\nSee \"IMPORTANT NOTES\" below before using Alternate Capacity."
402, "\nIMPORTANT NOTES:\nSee the Set Drive Size Utility for an alternative to using the Alternate Capacity jumper. On systems with BIOS problems, the Set Drive Size option WILL allow access to the entire drive capacity.\n\nUsing the Alternate Capacity jumper WILL change the size available on your drive. Once installed with this setting, changing it after the drive has been written to will not allow access to the remaining space - and Will result in data loss.\n\nIf the drive is moved to a computer whose BIOS does support the drive: Backup the data, remove the Alternate Capacity jumper and reformat the drive to gain access to the full capacity."
403, "License Agreement"
404, "LICENSE AGREEMENT: TERMS AND CONDITIONS OF USE\n\nIMPORTANT NOTICE. Read this License Agreement carefully before downloading or using this Software. BY DOWNLOADING OR USING THIS SOFTWARE IN ANY WAY YOU ACKNOWLEDGE THAT YOU HAVE READ, UNDERSTAND AND AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD THIS SOFTWARE, DO NOT USE THIS SOFTWARE IN ANY WAY, AND PROMPTLY RETURN THE SOFTWARE (AND ALL WRITTEN MATERIALS AND CONTAINERS) TO THE PLACE WHERE YOU OBTAINED THEM OR DELETE OR DESTROY ANY COPIES OF THIS SOFTWARE IN YOUR POSSESSION."
405, "\nLICENSE. ONTRACK Data International, Inc. or any subsidiary (\"ONTRACK\") grants you a non-exclusive, non-commercial personal use license to use this software and any associated documentation (\"Software\") as indicated herein. The Software is designed and licensed for use on a single computer. The Software is in \"use\" on a single computer when it has been loaded into temporary memory (i.e. RAM) or installed into permanent memory (e.g. hard disk or other storage device) of that computer. Use of the Software on multiple computers is not permitted. You may transfer your license rights to another with the written permission of ONTRACK, only under the following conditions: You must transfer a copy of this License Agreement, all documentation, and at least one complete, unaltered copy of the Software to the other party. You must, at the same time, either transfer all your other copies of the Software to the other party or destroy them.\n"
406, "\nOTHER RESTRICTIONS. You shall not: (a) remove any product identification, copyright notices, or other notices or proprietary restrictions from the Software; (b) transfer, rent, lease, sublicense, copy, or distribute the Software; (c) cause or permit reverse engineering, disassembly, decompilation or alteration of this software; or (d) permit use of the Software in a: (i) computer service business; (ii) network; (iii) timesharing; or (iv) multiple CPU or multiple user arrangement unless all CPUs and/or users are properly individually or site licensed by ONTRACK.\n\nTERM. This License is effective until terminated. You may terminate it at any time by destroying the Software, together with all copies thereof. This license will also terminate if you fail to comply with any term or condition of this Agreement. Upon such termination, you agree to destroy the Software, together with all copies thereof.\n"
407, "\nCOPYRIGHT/OWNERSHIP. This Software and its source code are proprietary products of ONTRACK and are protected by copyright and other intellectual property laws. The Software is licensed and not sold. You acquire only the right to use the Software and do not acquire any rights, express or implied, in the Software or media containing the Software other than those specified in this License. ONTRACK shall at all times retain all rights, title, interest, including intellectual property rights, in the Software and media.\n\nTRADEMARKS. ONTRACK and the ONTRACK brand and product names referred to herein are trademarks or registered trademarks of ONTRACK Data International, Inc. in the United States and/or other countries. All other brand and product names are trademarks or registered trademarks of their respective holders."
408, "\nEXPORT RESTRICTIONS. You agree to comply fully with all laws and regulations of the United States and other countries (Export Laws) to assure that neither the Software, nor any direct products thereof are (1) exported, directly or indirectly, in violation of Export Laws, or (2) are used for any purpose prohibited by Export Laws, including, without limitation, nuclear, chemical, or biological weapons proliferation. \n\nNone of the Software or underlying information or technology may be downloaded or otherwise exported or re-exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, Yugoslavia, North Korea, Iran, Syria or any other country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury Department's List of Specially Designated Nationals or the U.S. Commerce Department's Table of Denial Orders. By "
409, "downloading or using the Software, you are agreeing to the foregoing and you are representing and warranting that you are not located in, under the control of, or a national or resident of any such country or on any such list.\n\nDISCLAIMER OF WARRANTIES. THIS SOFTWARE IS DISTRIBUTED \"AS IS\" AND YOU, ITS USER, ASSUME ALL RISKS WHEN DOWNLOADING OR USING IT. THERE ARE NO WARRANTIES EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE. ONTRACK DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ONTRACK DOES NOT WARRANT THAT THE SOFTWARE IS NON-INFRINGING, THAT IT WILL MEET YOUR REQUIREMENTS OR THAT ITS OPERATION WILL BE UNINTERRUPTED, ERROR-FREE OR VIRUS FREE. IN NO EVENT SHALL ONTRACK BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (WHICH SHALL INCLUDE WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS OR PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS "
410, "INFORMATION, OR OTHER PECUNIARY LOSS) WHETHER BASED ON CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF ONTRACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.\n\nGOVERNING LAW: You agree this Agreement shall be governed by the laws of the State of Minnesota, excluding (i) that body of law known as conflicts of law, and (ii) the United Nations Convention on Contracts for the Sale of Goods, and each party hereto submits to the exclusive jurisdiction of the Courts of that State. You further agree that this agreement is the complete and exclusive statement of the agreement between you and ONTRACK relating to the use of this Software."
411, "\nU.S. GOVERNMENT RESTRICTED RIGHTS. In the event the Federal Acquisition Regulations (FAR) or DFARS is applicable to this Agreement, the Software is provided only with Restricted Rights as defined in paragraph 52.227-19 or paragraph 252.227-7013(c)(1)(ii), respectively (or a comparable or successor clause to either), as applicable.\n\nContractor/manufacturer is ONTRACK Data International, Inc., 9023 Columbine Road, Eden Prairie, MN 55347.\n\nOEMDM101001"
412, "Maintenance Options"
413, "The maintenance options include a number of useful services for maintaining your hard drive installation and for updating from an older version of the software. A description of each option is included below.\n\nCreate Ontrack Boot Diskette\nThis option will create an Ontrack Boot Diskette which can be used to safely boot a system installed using the Dynamic Drive Overlay. An Ontrack Boot Diskette is a bootable diskette with the Dynamic Drive Overlay installed on it.\n\nUpgrade\nIf you have a hard drive installed using a previous version of the Dynamic Drive Overlay, you can upgrade by automatically updating the Dynamic Drive Overlay and by writing new MBR boot code to all drives on your system. This option can also be used if you received the \"Error Loading OS\" message during system boot."
414, "\n\nUpdate MBR Boot\nThis option will update the part of the MBR that contains the boot code. If the MBR boot code becomes corrupted or is replaced by another utility, your system may not boot and the Dynamic Drive Overlay will not be loaded. Re-writing the boot code will correct these conditions in most cases.\n\nUpdate Dynamic Drive Overlay\nThis option will allow you to update the Dynamic Drive Overlay (DDO) on all drives in your system that require it. You can use this option to upgrade from an older version of DDO, modify the DDO switches, or replace a corrupted DDO."
415, "\n\nRemove Dynamic Drive Overlay\nThis option will remove the Dynamic Drive Overlay (DDO) from the selected drive. You can use this option if your system is using software that cannot coexist with the DDO. You may also use this option if you have moved a drive to a system with a BIOS that supports translation, eliminating the need for the DDO. If your system BIOS can support the drive as it is installed, the DDO will be uninstalled non-destructively. You will get a warning if uninstalling DDO from a drive will be destructive. Always make a backup of your data before uninstalling a drive.\n\nConvert Drive Format\nThis option will convert all drives on a system to use the Dynamic Drive Overlay if they were installed using another hard drive partitioning software. Always make a backup of your data before converting a drive."
